Zwave AC Thermostat By Mcohome Model MH6-HP (24 Volt AC)

MH6-HP programmable thermostat is a Z-Wave enabled device for indoor temperature control. It is mainly applied to heat pump system for heating & Colling with 3 modes easily switchable: schedule, Hold and Holiday. the device is of high reliability and practicability, and it can support up to 3H/2C system. This product can be included and operated in any Z-Wave network (EURO St.) with other Z-Wave certified devices from any other manufacturers.

Qubino Z-Wave DIN Dimmer
• (MOSFET switching) dimming device in the world which also supports control of: low voltage halogen lamps with electronic transformer, dimmable compact fluorescent light.
• Dimming loads: (1 to 200) W
• Easy installation The device is designed to be mounted inside an electrical cabinet onto DIN rail.
• Extremely low energy consumption: less than 0.7 W.
• Extended operating temperatures: (-10 to 40) ˚C.
• Support for the connection of digital temperature sensor.
• Power consumption measurement integrated
Power supply 110 - 240 VAC ±10% 50/60Hz*, (24-30VDC)
Rated load current of AC/DC output (resistive load) 0,85A / 240VAC 0,85A / 30VDC
Output circuit power of AC/DC output (resistive load)
Power measurement accuracy +/-2W
Z-Wave operation range up to 30 m indoors (98 ft)
ZMNHSD1/ 50 Hz/ 868,4 MHz (EU, China, UAE, Kuwait, Jordan, Lebanon)

Qubino Z-Wave Smart Meter
This device is used for energy measurements in single-phase electrical power network up to 65 A. Meters measure energy directly in 2-wire networks according to the principle of fast sampling of voltage and current signals.
• Measurement up to 65A (single phase)
• Easy installation (DIN rain mounting)
• Switching control (ON/OFF) 2x32A
(with IKA and BICOM)
• Security 2 (S2) Authenticated supported
Z-Wave operation range up to 30 m indoors (98 ft)
ZMNHSD1/ 50 Hz/ 868,4 MHz (EU, China, UAE, Kuwait, Jordan, Lebanon)

Qubino Z-Wave Flush Dimmer
This module is used for dimming the light or to manage the speed of a fan. The module can be controlled either through a Z-Wave network or through the wall switch. The module is designed to be mounted inside a “flush mounting box” and is hidden behind a traditional wall switch.
The first (MOSFET switching) dimming module in the world which also supports control of:
• low voltage halogen lamps with electronic transformer,
• dimmable compact fluorescent light.
The smallest dimming module in the world.
Special designed casing ensure the most simplified installation (ease of cabling fixing) inside a flush mounting box.
PROVED and TESTED BY PROFESSIONAL ELECTRICIANS! Extremely low energy consumption: less than 0.7 W.
Extended operating temperatures: (-10 to 40) ˚C.
Support for the connection of digital temperature sensor. Power consumption measurement.
2 binary inputs offer the option to connect additional devices such as sensors, switches/push buttons, etc.
Z-Wave operation range up to 30 m indoors (98 ft)
ZMNHSD1/ 50 Hz/ 868,4 MHz (EU, China, UAE, Kuwait, Jordan, Lebanon)

Iskra 32A Contactor Model IKA232-20/230 V Smart meter accessory
Module is accessory of Smart Meter. It is used for switching On or Off the electrical load up to 32 A.
Communication with Smart Meter: over terminals A1 on IKA232-20 and 5 on Smart Meter.

Qubino Z-Wave Flush Dimmer
Dimmer 0-10V module is used for dimming lights, fan speed regulation and control of any other device with 0-10V input control.
Module has a standard 0-10V output and a multi-function input, which may be a push button / switch, a potentiometer or 0-10V signal.
Z-Wave operation range up to 30 m indoors (98 ft)
ZMNHSD1/ 50 Hz/ 868,4 MHz (EU, China, UAE, Kuwait, Jordan, Lebanon)